2297191 Seal Kits Lift Tift 992G Wheel Loader

2297191 KIT SEAL parts lift tift 992G KIT WHEEL LOADER

2297191 KIT SEAL parts lift tift 992G KIT

Part Number: 2297191
Keywords: Hydraulic Cylinder Seal Kit, Fits CAT Excavator Loader, Steering, Lift, Tilt

Product Description:
Introducing our premium Hydraulic Cylinder Seal Kit, specifically designed to fit CAT excavators and loaders for steering, lift, and tilt functions. This seal kit is meticulously engineered to provide a reliable sealing solution for the hydraulic cylinder involved in the steering, lift, and tilt operations of CAT excavators and loaders.

Key Features:

1. Comprehensive Seal Kit: Our Hydraulic Cylinder Seal Kit comprises a complete set of seals and components necessary for a comprehensive hydraulic cylinder overhaul, ensuring proper sealing and efficient functionality for the steering, lift,

2297191 - KIT-Seal fit ()
FIRST PRICE PARTS

Table 1
Required Tools
Tool Part Number Part Description Qty
C 1P-0510 Driver Gp 1
D 7N-8268 Installation Tool 1
E 438-8155 Installation Tool 1 Reference: Refer to Reuse and Salvage Guidelines, SEBF8418, "Salvage of Water Pumps in 3500 Series Engines" for reuse and salvage guidelines.
Illustration 1 g06133754
Install filters (15) into pump housing (10).
Illustration 2 g06133753
Install ring (14) and the loing pin.
Use Tooling (C) to install lip seal (13) into pump housing (10).
Illustration 3 g06133750
Install shaft assembly (8), thrust washer (9), bolts (7), and the washers into pump housing (10).
Illustration 4 g06133755
Illustration 5 g03476619

Arm cylinder is the top one, and it's usually be called as top cylinder;
The bucket cylinder is the one that connects and controls the bucket.
Boom cylinder is the one (or the two) near the cabin. Usually, there is one piece boom cylinder for the small excavator under 10-tun; the bigger excavator's two pieces boom cylinders. But there is an exception too when the driver will remove one piece for a special purpose, say at some particular working place, it is convenient to work by one cylinder. Soft remind: all refit job should be operated by an experienced technician.
Use Tooling (D) to install stationary seal group (11) with the ceramic side facing out.
Illustration 6 g06133756
Illustration 7 g06133757
Use Tooling (E) and a suitable press to install rotating seal group (6). Rotating seal group (6) is to be installed with installation clips (X) in place until rotating seal group (6) is fully seated. Remove installation clips (X).Note: Do not use hammer to install seal groups as damage to the ceramic faces on the seal groups will occur.
Illustration 8 g06133758
Lubrie the shaft assembly with a light coat of engine oil. Use a suitable press to install impeller (5) into pump housing (10) and onto the shaft assembly. Install impeller (5) to a depth of 0.0 0.15 mm (0.00000 0.00591 inch) from the end of the shaft assembly to the outer face of the impeller.Note: Support the shaft assembly to prevent damage to the thrust washer.
Illustration 9 g06133759
Install plug assembly (12) and the O-ring seal into pump housing (10).