4S9006 5M4997 D7G D8G D9G 4S9006 5H9467 Fit For 3306
4S9006 SEAL parts 205B, 206B, 211B, 215B, 225, 227, 229, 571G, 572G, 955K, 955L, 963, 973, 977H, 977K, 977L, D6C, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2, FB221 SEAL
Aftermarket replacement 4S9006 Seal, Packing
Generic P004645, 5H9467, 4S9006, 1S8807, M-4S9006, Seal, Packing, , Seal, Packing 4S9006,
Compatible equipment models: 4S9006:
EXCAVATOR 205B 206B 211B 215B 225 229
LOGGER 227
PIPELAYER 571G 572G
TRACK FELLER BUNCHER FB221
TRACK LOADER 955K 955L 963 973 977H 977K 977L
TRACK-TYPE TRACTOR D6C D6D D6E D6E SR D6G D6G SR D6G2 LGP D6G2 XL D7F D7G D7G2
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publiion, NENG2500, "Dealer Service Tool alog" for tools and supplies suitable to collect and contain fluids on products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Illustration 1 g01131904
Disconnect hose assembly (2).
Disconnect hose (4).
Attach a suitable lifting device to engine oil cooler (3). The weight of engine oil cooler (3) is approximately 23 kg (50 lb).
Remove bolts (5) and (6).
Remove bonnet (1).
Remove engine oil cooler (3).
